VVanguard Garage Door Repair ☎ (630) 625-9478
Skip to content

Why Your Garage Door Will Not Close (Joliet Homeowner Tips)

If your garage door starts to close and then reverses back up, the safety sensors are the most likely culprit, not a broken opener. Here is what Joliet homeowners can check before calling for help.

Check the photo-eye sensors first

Two small sensors sit a few inches off the floor on each side of the door. They shine an invisible beam across the opening, and if anything breaks that beam, the opener refuses to close as a safety measure. Look for a steady indicator light on both sensors.

Common sensor problems

Cobwebs, dust, or a smudged lens can block the beam. A bumped sensor can fall out of alignment so the two no longer point at each other. A bike, a trash can, or a snow shovel leaning in the path will also stop the door. Bright sun hitting a lens at the wrong angle can interfere too.

What you can try safely

Wipe both lenses gently with a soft cloth, clear anything in the doorway, and make sure both brackets are pointed straight at each other. If one light is off or blinking while the other is steady, they are misaligned.

When to call

If the door still will not close, the sensor may have failed, the wiring may be damaged, or the opener travel settings may need adjusting. We repair and align garage door safety sensors the same day, and you can learn more about our Joliet garage door repair service. Never disable the sensors to force the door closed, since they are what stop a closing door from landing on a child, pet, or car.

☎ Call (630) 625-9478

Garage door will not close FAQs

Why does my garage door reverse before closing?
Usually the photo-eye safety sensors are blocked, dirty, or out of alignment, so the opener refuses to close the door. Cleaning and realigning them often fixes it.
What do the sensor lights mean?
A steady light on both sensors means they are aligned. If one is off or blinking, they are not seeing each other, which stops the door from closing.
Can I disable the sensors so the door closes?
No. The sensors are a safety feature that stops a closing door from landing on a person, pet, or car. We repair them rather than bypass them.
The door only closes if I hold the wall button. Why?
Holding the button overrides the sensors, which confirms the sensors are the problem. We correct the alignment or wiring so normal operation returns.
How fast can you fix this in Joliet?
We offer same-day service seven days a week from 7am to 9pm, and most sensor repairs are done on the first visit.

Published September 19, 2026